Keystone Electronics Products

LED HOLDER T1 3MM NYLON NATURAL

• Color: Natural
• Length: 0.360" (9.14mm)
• LED: T1
• Material: Nylon

FUSE BLOCK CART 500V 15A CHASSIS

• Fuseholder Type: Block
• Fuse Type: Cartridge
• For Use With/Related Products: 3AG
• Fuse Size: 1/4" Dia x 1 1/4" L (6.4mm x 31.8mm)
• Number of Circuits: 2
• Number of Circuits: 2
• Voltage: 500V
• Current Rating: 15A
• Mounting Type: Chassis Mount
• Orientation: -
• Termination Style: Solder Lug
• Contact Material: Brass
• Contact Finish: Nickel

SW TACT SPST-NO 12MA 24V GOLD

• Circuit: SPST-NO
• Switch Function: Off-Mom
• Contact Rating @ Voltage: 0.012A @ 24VDC
• Actuator Type: Snap Dome
• Mounting Type: Surface Mount
• Actuator Height off PCB, Vertical: 0.55mm
• Actuator Length, Right Angle: -
• Actuator Orientation: Top Actuated
• Termination Style: SMD (SMT) Tab
• Outline: 7.00mm x 7.00mm
• Illumination: Non-Illuminated
• Illumination Type, Color: -
• Illumination Voltage (Nominal): -
• Operating Force: 400gf
• Ingress Protection: -
• Features: Flex Membrane

RES SMD 0.0 OHM JUMPER 1/2W 0805

• Resistance: 0 Ohms
• Tolerance: Jumper
• Power (Watts): 0.5W, 1/2W
• Composition: Thick Film
• Features: -
• Temperature Coefficient: -
• Operating Temperature: -
• Package / Case: 0805 (2012 Metric)
• Supplier Device Package: 0805
• Size / Dimension: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Height - Seated (Max): 0.028" (0.71mm)
• Number of Terminations: 2
• Failure Rate: -

TERM TURRET SINGLE L=4.75MM TIN

• Terminal Type: Single End
• Number of Turrets: Single
• Length - Above Board: 0.187" (4.75mm)
• Length - Below Flange: 0.078" (1.98mm)
• Length - Overall: 0.265" (6.73mm)
• Mounting Type: Through Hole
• Termination: Staking Flare
• Flange Diameter: 0.125" (3.18mm)
• Diameter - Turret Head: 0.075" (1.91mm)
• Staking Side OD: 0.078" (1.98mm)
• Staking Side ID: -
• Mounting Hole Diameter: 0.082" (2.08mm)
• Board Thickness: 0.032" (0.81mm)
• Contact Material: Brass
• Contact Finish: Tin
• Contact Finish Thickness: -
• Insulation: Non-Insulated

TERM TURRET HOLLOW L=3.96MM TIN

• Terminal Type: Single End, Fork, Hollow
• Number of Turrets: Single
• Length - Above Board: 0.156" (3.96mm)
• Length - Below Flange: 0.089" (2.26mm)
• Length - Overall: 0.245" (6.22mm)
• Mounting Type: Through Hole
• Termination: Staking Flare
• Flange Diameter: 0.062" (1.57mm)
• Diameter - Turret Head: -
• Staking Side OD: 0.046" (1.17mm)
• Staking Side ID: -
• Mounting Hole Diameter: 0.052" (1.32mm)
• Board Thickness: 0.062" (1.57mm)
• Contact Material: Brass
• Contact Finish: Tin
• Contact Finish Thickness: -
• Insulation: Non-Insulated

TERM TURRET SINGLE L=5.56MM TIN

• Terminal Type: Single End
• Number of Turrets: Double
• Length - Above Board: 0.219" (5.56mm)
• Length - Below Flange: 0.078" (1.98mm)
• Length - Overall: 0.297" (7.54mm)
• Mounting Type: Through Hole
• Termination: Staking Flare
• Flange Diameter: 0.125" (3.18mm)
• Diameter - Turret Head: 0.093" (2.36mm)
• Staking Side OD: 0.090" (2.29mm)
• Staking Side ID: -
• Mounting Hole Diameter: 0.094" (2.39mm)
• Board Thickness: 0.032" (0.81mm)
• Contact Material: Brass
• Contact Finish: Tin
• Contact Finish Thickness: -
• Insulation: Non-Insulated

TERM TURRET SINGLE L=3.96MM TIN

• Terminal Type: Single End
• Number of Turrets: Double
• Length - Above Board: 0.156" (3.96mm)
• Length - Below Flange: 0.084" (2.13mm)
• Length - Overall: 0.240" (6.10mm)
• Mounting Type: Through Hole
• Termination: Staking Flare
• Flange Diameter: 0.094" (2.39mm)
• Diameter - Turret Head: 0.062" (1.57mm)
• Staking Side OD: 0.062" (1.57mm)
• Staking Side ID: -
• Mounting Hole Diameter: 0.067" (1.70mm)
• Board Thickness: 0.062" (1.57mm)
• Contact Material: Brass
• Contact Finish: Tin
• Contact Finish Thickness: -
• Insulation: Non-Insulated

CONN SPADE TERM 10-12AWG #6 YEL

• Terminal Type: Flanged
• Stud/Tab Size: 6 Stud
• Width - Outer Edges: 0.320" (8.13mm)
• Length - Overall: 0.840" (21.34mm)
• Mounting Type: Free Hanging (In-Line)
• Termination: Crimp
• Wire Gauge: 10-12 AWG
• Insulation: Insulated
• Features: -
• Color: Yellow

TERM SCREW 6-32 2 PIN PCB

• Terminal Type: Screw Terminal, Power Tap
• Screw Size: 6-32
• Termination: Solder
• Current Rating: 15A
• Number of Pins: 2
• Mounting Type: Through Hole
• Features: Anti-Rotational Tab, Low Profile

TERM SCREW 6-32 2 PIN PCB

• Terminal Type: Screw Terminal, Power Tap
• Screw Size: 6-32
• Termination: Solder
• Current Rating: 15A
• Number of Pins: 2
• Mounting Type: Through Hole
• Features: Low Profile

TERM SCREW M3 4 PIN PCB

• Terminal Type: Screw Terminal, Power Tap
• Screw Size: M3
• Termination: Solder
• Current Rating: 15A
• Number of Pins: 4
• Mounting Type: Through Hole
• Features: -

TERM SCREW M3 4 PIN PCB RA

• Terminal Type: Screw Terminal, Power Tap
• Screw Size: M3
• Termination: Snap-Fit
• Current Rating: 15A
• Number of Pins: 4
• Mounting Type: Through Hole, Right Angle
• Features: -

TERM SCREW 6-32 4 PIN PCB RA

• Terminal Type: Screw Terminal, Power Tap
• Screw Size: 6-32
• Termination: Solder
• Current Rating: 15A
• Number of Pins: 4
• Mounting Type: Through Hole, Right Angle
• Features: -

CONN RING CIRC 18-22AWG #10

• Terminal Type: Circular
• Stud/Tab Size: 10 Stud
• Thickness: 0.030" (0.76mm)
• Width - Outer Edges: 0.330" (8.38mm)
• Length - Overall: 0.900" (22.86mm)
• Mounting Type: Free Hanging (In-Line)
• Termination: Crimp
• Wire Gauge: 18-22 AWG
• Insulation: Insulated
• Features: -
• Color: Red
• Contact Material: Copper, ETP
• Contact Finish: Tin

CONN QC TAB 0.205 SOLDER

• Terminal Type: Standard
• Gender: Male
• Tab Width: 0.205" (5.21mm)
• Tab Thickness: 0.032" (0.81mm)
• Tab Length: -
• Length - Overall: -
• Termination: Solder
• Wire Gauge: -
• Insulation: Non-Insulated
• Mounting Type: Through Hole, Right Angle
• Features: -
• Color: -

CONN PC PIN CIRC 0.018DIA GOLD

• Terminal Type: PC Pin
• Terminal Style: Single End
• Pin Size - Above Flange: -
• Pin Size - Below Flange: 0.018" (0.46mm) Dia
• Length - Above Flange: 0.240" (6.10mm)
• Length - Below Flange: -
• Length - Overall: 0.260" (6.60mm)
• Flange Diameter: 0.032" (0.81mm)
• Mounting Hole Diameter: 0.026" (0.66mm)
• Mounting Type: Through Hole
• Termination: Press-Fit, Knurled
• Insulation: Non-Insulated
• Board Thickness: 0.062" (1.57mm)
• Contact Material: Phosphor Bronze
• Contact Finish: Gold
• Contact Finish Thickness: 10µin (0.25µm)

CONN PIN RCPT .025-.037 HEX

• Tail Type: No Tail
• Termination: Press-Fit, Hex
• Length - Overall: 0.200" (5.08mm)
• Accepts Pin Diameter: 0.025" ~ 0.037" (0.64mm ~ 0.94mm)
• Mounting Hole Diameter: 0.063" (1.60mm)
• Pin Hole Diameter: -
• Flange Diameter: 0.078" (1.98mm)
• Tail Diameter: -
• Socket Depth: 0.165" (4.19mm)
• Contact Material: Beryllium Copper
• Contact Finish: Tin
• Contact Finish Thickness: 200µin (5.08µm)

CONN PIN RCPT .032-.046 SOLDER

• Tail Type: No Tail
• Termination: Solder
• Length - Overall: 0.206" (5.23mm)
• Accepts Pin Diameter: 0.032" ~ 0.046" (0.81mm ~ 1.17mm)
• Mounting Hole Diameter: 0.076" (1.93mm)
• Pin Hole Diameter: -
• Flange Diameter: 0.091" (2.31mm)
• Tail Diameter: -
• Socket Depth: 0.180" (4.57mm)
• Contact Material: Beryllium Copper
• Contact Finish: Gold
• Contact Finish Thickness: 10µin (0.25µm)

BOARD TERMINAL TURRET DBL 33POS

• Type: Turret Board
• Terminal Type: Turret, Single End, Single Turret, Hollow
• Number of Positions: 66
• Pitch: 0.218" (5.54mm)
• Number of Rows: 2
• Row Spacing: 0.500" (12.70mm)
• Board Size: 7.687" L x 0.750" W x 0.062" H (195.20mm x 19.10mm x 1.57mm)
• Material - Board: Glass Epoxy
• Features: Miniature Strip
• Material Flammability Rating: -

BOARD TERM TURRET MINI 50POS

• Type: Turret Board, Scored
• Terminal Type: Turret, Dual End, Double Turret
• Number of Positions: 50
• Pitch: 0.250" (6.35mm)
• Number of Rows: 2
• Row Spacing: 0.812" (20.60mm)
• Board Size: 9.687" L x 1.125" W x 0.062" H (246.00mm x 28.60mm x 1.57mm)
• Material - Board: Glass Epoxy
• Features: Miniature Strip
• Material Flammability Rating: -

BOARD TERM TURRET MINI 50POS

• Type: Turret Board, Scored
• Terminal Type: Turret, Single End, Single Turret
• Number of Positions: 50
• Pitch: 0.250" (6.35mm)
• Number of Rows: 2
• Row Spacing: 0.562" (14.30mm)
• Board Size: 9.687" L x 0.875" W x 0.062" H (246.00mm x 22.20mm x 1.57mm)
• Material - Board: Glass Epoxy
• Features: Miniature Strip
• Material Flammability Rating: -

BOARD TERM TURRET MINI 25POS

• Type: Turret Board, Scored
• Terminal Type: Turret, Fork End
• Number of Positions: 25
• Pitch: 0.218" (5.54mm)
• Number of Rows: 1
• Row Spacing: -
• Board Size: 7.812" L x 0.312" W x 0.062" H (198.40mm x 7.90mm x 1.57mm)
• Material - Board: Glass Epoxy
• Features: Miniature Strip
• Material Flammability Rating: -

CONN RCA JACK MONO 3.2MM PNL MT

• Connector Type: Phono (RCA) Jack
• Gender: Female
• Signal Lines: Mono
• Industry Recognized Mating Diameter: 3.20mm ID, 9.00mm OD (RCA)
• Actual Diameter: 0.134" (3.40mm ID), 0.328" (8.33mm OD)
• Number of Positions/Contacts: 2 Conductors, 2 Contacts
• Internal Switch(s): Does Not Contain Switch
• Mounting Type: Panel Mount
• Termination: Solder Eyelet(s)
• Shielding: Unshielded
• Features: Grounding Tab, Mounting Hardware
• Insulation Color: White

CONN RCA JACK MONO 3.2MM R/A

• Connector Type: Phono (RCA) Jack
• Gender: Female
• Signal Lines: Mono
• Industry Recognized Mating Diameter: 3.20mm ID, 9.00mm OD (RCA)
• Actual Diameter: 0.125" (3.18mm ID), 0.327" (8.31mm OD)
• Number of Positions/Contacts: 2 Conductors, 3 Contacts
• Internal Switch(s): Single Switch
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Shielding: Unshielded
• Features: Board Lock
• Insulation Color: Yellow

CONN JACK MONO 2.5MM SMD R/A

• Connector Type: Phone Jack
• Gender: Female
• Signal Lines: Mono
• Industry Recognized Mating Diameter: 2.50mm (0.094", 3/32", Sub Mini, Miniature) - Headphone
• Actual Diameter: 0.102" (2.60mm)
• Number of Positions/Contacts: 2 Conductors, 3 Contacts
• Internal Switch(s): Single Switch
• Mounting Type: Surface Mount, Right Angle
• Termination: Solder
• Shielding: Unshielded
• Features: Board Guide
• Insulation Color: -

CONN RCA JACK MONO 3.2MM PCB

• Connector Type: Phono (RCA) Jack
• Gender: Female
• Signal Lines: Mono
• Industry Recognized Mating Diameter: 3.20mm ID, 9.00mm OD (RCA)
• Actual Diameter: -
• Number of Positions/Contacts: 2 Conductors, 2 Contacts
• Internal Switch(s): Does Not Contain Switch
• Mounting Type: Through Hole
• Termination: Rivet
• Shielding: Unshielded
• Features: -
• Insulation Color: Red

TIP STREAMLINE .080" TIP BLACK

• Type: Tip Plug
• Gender: Male
• Plug/Mating Plug Diameter: Standard Tip
• Mounting Type: Free Hanging (In-Line)
• Termination: Solder
• Insulation: Non-Mating End Insulated
• Features: -
• Color: Black
• Wire Gauge: -