TE Connectivity Aerospace, Defense and Marine Products

RELAY GEN PURPOSE DPDT 2A 18V

• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: 27.66mA
• Coil Voltage: 18VDC
• Contact Form: DPDT (2 Form C)
• Contact Rating (Current): 2A
• Switching Voltage: 115VAC, 28VDC - Max
• Turn On Voltage (Max): -
• Turn Off Voltage (Min): -
• Operate Time: 4ms
• Release Time: 4ms
• Features: Sealed - Hermetically
• Mounting Type: Chassis Mount
• Termination Style: Solder Hook

CONN RING D-SHAPE 300-350MCM 1/2

• Terminal Type: D-Shaped
• Stud/Tab Size: 1/2 Stud
• Thickness: 0.136" (3.45mm)
• Width - Outer Edges: 1.535" (38.98mm)
• Length - Overall: 2.671" (67.84mm)
• Mounting Type: Free Hanging (In-Line)
• Termination: Crimp
• Wire Gauge: 300-350 MCM (kcmil)
• Insulation: Non-Insulated
• Features: Brazed Seam
• Color: -
• Contact Material: Copper
• Contact Finish: Tin

CONN RING CIRC 14-16AWG CRIMP

• Terminal Type: Circular
• Stud/Tab Size: -
• Thickness: -
• Width - Outer Edges: 0.394" (10.00mm)
• Length - Overall: 1.300" (33.02mm)
• Mounting Type: Free Hanging (In-Line)
• Termination: Crimp
• Wire Gauge: 14-16 AWG
• Insulation: Insulated with Heat Shrink
• Features: -
• Color: Blue
• Contact Material: Copper Alloy
• Contact Finish: Tin

TJ SZ 20/22 SPEC WIDE SINGLE

• Type: Wire Splice, Resistor
• Contact Size: 20
• Module Capacity: -
• Size / Dimension: 3.100" L (78.74mm)

CONN RCPT 120POS BRD EDGE AU

• Connector Type: Receptacle
• Contact Type: Female Socket
• Style: Board to Board
• Number of Positions: 120
• Number of Positions Loaded: All
• Pitch - Mating: 0.075" (1.91mm)
• Number of Rows: 2
• Row Spacing - Mating: 0.125" (3.18mm)
• Mounting Type: Board Edge, Straddle Mount
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Finish - Mating: Gold
• Contact Finish Thickness - Mating: 50µin (1.27µm)
• Insulation Color: Blue
• Insulation Height: -
• Contact Length - Post: -
• Operating Temperature: -
• Material Flammability Rating: -
• Contact Finish - Post: Tin-Lead
• Mated Stacking Heights: -
• Ingress Protection: -
• Features: Card Extender, Mating Guide

CONN RCPT 50POS DUAL .100 T/H

• Connector Type: Receptacle
• Contact Type: Female Socket
• Style: Board to Board
• Number of Positions: 50
• Number of Positions Loaded: All
• Pitch - Mating: 0.100" (2.54mm)
• Number of Rows: 2
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Wire Wrap
• Fastening Type: Push-Pull
• Contact Finish - Mating: Gold
• Contact Finish Thickness - Mating: 50µin (1.27µm)
• Insulation Color: Blue
• Insulation Height: 0.400" (10.16mm)
• Contact Length - Post: 0.405" (10.29mm)
• Operating Temperature: -
• Material Flammability Rating: -
• Contact Finish - Post: -
• Mated Stacking Heights: -
• Ingress Protection: -
• Features: Mating Guide

I/O CONN

• Connector Type: -
• Contact Type: -
• Pitch - Mating: -
• Style: -
• Shrouding: -
• Number of Positions: -
• Number of Positions Loaded: -
• Number of Rows: -
• Row Spacing - Mating: -
• Mounting Type: -
• Termination: -
• Fastening Type: -
• Contact Length - Mating: -
• Contact Length - Post: -
• Overall Contact Length: -
• Insulation Height: -
• Contact Shape: -
• Contact Finish - Mating: -
• Contact Finish Thickness - Mating: -
• Contact Finish - Post: -
• Contact Material: -
• Insulation Material: -
• Features: -
• Operating Temperature: -
• Ingress Protection: -
• Material Flammability Rating: -
• Insulation Color: -

I/O CONN

• Connector Type: -
• Contact Type: -
• Number of Positions: -
• Pitch: -
• Number of Rows: -
• Row Spacing: -
• Mounting Type: -
• Fastening Type: -
• Cable Termination: -
• Wire Type: -
• Wire Gauge: -
• Features: -
• Contact Finish: -
• Contact Finish Thickness: -
• Color: -

I/O CONN

• Connector Type: -
• Contact Type: -
• Number of Positions: -
• Pitch: -
• Number of Rows: -
• Row Spacing: -
• Mounting Type: -
• Fastening Type: -
• Cable Termination: -
• Wire Type: -
• Wire Gauge: -
• Features: -
• Contact Finish: -
• Contact Finish Thickness: -
• Color: -

JACKSCREW

• Accessory Type: Jackscrew
• Number of Positions: -
• For Use With/Related Products: Mini-Box Series
• Features: -

CONN D-SUB RCPT HD 15P SER 90

• Connector Style: D-Sub, High Density
• Connector Type: Receptacle for Female Contacts
• Number of Positions: 15
• Number of Rows: 3
• Shell Size, Connector Layout: 1 (DE, E) High Density
• Contact Type: Signal
• Mounting Type: Free Hanging (In-Line)
• Flange Feature: Housing/Shell (Unthreaded)
• Features: -
• Shell Material, Finish: Steel, Tin Plated
• Shell Finish Thickness: 400µin (10.16µm)
• Ingress Protection: -

AMPLIMITE IP67,SZ4,109,37P, IF S

• Connector Style: D-Sub
• Connector Type: Plug for Male Contacts
• Number of Positions: 37
• Number of Rows: 2
• Shell Size, Connector Layout: 4 (DC, C)
• Contact Type: Signal
• Mounting Type: Free Hanging (In-Line)
• Flange Feature: Housing/Shell (Unthreaded)
• Features: -
• Shell Material, Finish: Steel, Cadmium Plated
• Shell Finish Thickness: -
• Ingress Protection: IP67 - Dust Tight, Waterproof

CONN D-SUB RCPT 15POS R/A SOLDER

• Connector Style: D-Sub
• Connector Type: Receptacle, Female Sockets
• Number of Positions: 15
• Number of Rows: 2
• Shell Size, Connector Layout: 2 (DA, A)
• Contact Type: Signal
• Mounting Type: Through Hole, Right Angle
• Flange Feature: Housing/Shell (Unthreaded)
• Termination: Solder
• Features: -
• Shell Material, Finish: Steel, Yellow Chromate Plated Zinc
• Contact Finish: Gold
• Contact Finish Thickness: 10µin (0.25µm)
• Ingress Protection: -
• Material Flammability Rating: -

CONN PIN 10AWG TIN CRIMP

• Type: Power, Stamped
• Pin or Socket: Pin
• Contact Termination: Crimp
• Wire Gauge: 10 AWG
• Material: Copper
• Plating: Tin
• Plating - Thickness: 50µin (1.27µm)

CONN ADAPT 7MM TO TNC PLUG 50OHM

• Adapter Type: -
• Conversion Type: Between Series
• Adapter Series: TNC to 7mm
• Center Gender: Male to Non-Gendered
• Convert From (Adapter End): 7mm Precision, Non-Gendered
• Convert To (Adapter End): TNC Plug, Male Pin
• Impedance: 50 Ohm
• Style: Straight
• Mounting Type: Free Hanging (In-Line)
• Mounting Feature: -
• Fastening Type: Threaded, Threaded
• Frequency - Max: -
• Ingress Protection: -
• Center Contact Plating: Gold
• Features: -

CONN BACKSHELL ADPT SZ 17E M25

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.279" (32.49mm)
• Shell Size - Insert: 17, E
• Thread Size: M25x1
• Cable Exit: 180°
• Material: Stainless Steel
• Plating: Passivated
• Shielding: Unshielded
• Color: -
• Features: Tinel Lock
• Ingress Protection: Environment Resistant

CONN BACKSHELL ADPT SZ 9A M12

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 0.709" (18.00mm)
• Shell Size - Insert: 9, A
• Thread Size: M12x1
• Cable Exit: 180°
• Material: Stainless Steel
• Plating: Passivated
• Shielding: Unshielded
• Color: -
• Features: Tinel Lock
• Ingress Protection: Environment Resistant

CONN BACKSHELL ADPT SZ20 37 OLIV

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.343" (34.10mm)
• Shell Size - Insert: 20, 37
• Thread Size: 1 3/16-18 UNEF
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Unshielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 32 OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 2.217" (56.30mm)
• Shell Size - Insert: 32
• Thread Size: 2-18 UNS
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Unshielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 21G SLVR

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.457" (37.00mm)
• Shell Size - Insert: 21, G
• Thread Size: M31x1
• Cable Exit: 45°
• Material: Aluminum Alloy
• Plating: Electroless Nickel
• Shielding: Shielded
• Color: Silver
• Features: Tinel Lock
• Ingress Protection: Environment Resistant

CONN BACKSHELL ADPT SZ 15D OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.142" (29.00mm)
• Shell Size - Insert: 15, D
• Thread Size: M22x1
• Cable Exit: 90°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Shielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: Environment Resistant

CONN BACKSHELL ADPT SZ 25J OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.713" (43.50mm)
• Shell Size - Insert: 25, J
• Thread Size: M37x1
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Unshielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: Environment Resistant

CONN BACKSHELL ADPT SZ18 27 OLIV

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.217" (30.90mm)
• Shell Size - Insert: 18, 27
• Thread Size: 1 1/16-18 UNEF
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Shielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 19F BLK

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.398" (35.50mm)
• Shell Size - Insert: 19, F
• Thread Size: M28x1
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Zinc Nickel
• Shielding: Shielded
• Color: Black
• Features: Tinel Lock
• Ingress Protection: Environment Resistant

CONN BACKSHELL ADPT SZ20 22 OLIV

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.535" (39.00mm)
• Shell Size - Insert: 20, 22
• Thread Size: 1 3/16-18 UNEF
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Unshielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 16E OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.350" (34.29mm)
• Shell Size - Insert: 16, E
• Thread Size: 1-28 UNEF
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Unshielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 14 14S

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.090" (27.69mm)
• Shell Size - Insert: 14, 14S
• Thread Size: 3/4-20 UNEF
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Unshielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

BUSHING SIDE ENTRY 2"

• Accessory Type: Bushing
• For Use With/Related Products: Circular Clamps
• Shell Size - Insert: -
• Material: Silicone Elastomer
• Features: Flame Retardant
• Color: Black