TE Connectivity Aerospace, Defense and Marine Products

RELAY GENERAL PURPOSE 4PDT 2A

• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: -
• Coil Voltage: -
• Contact Form: 4PDT (4 Form C)
• Contact Rating (Current): 2A
• Switching Voltage: 115VAC, 28VDC - Max
• Turn On Voltage (Max): -
• Turn Off Voltage (Min): -
• Operate Time: -
• Release Time: -
• Features: Sealed - Hermetically
• Mounting Type: -
• Termination Style: -

RELAY GENERAL PURPOSE DPDT 2A 5V

• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: 113.6mA
• Coil Voltage: 5VDC
• Contact Form: DPDT (2 Form C)
• Contact Rating (Current): 2A
• Switching Voltage: 115VAC, 28VDC - Max
• Turn On Voltage (Max): -
• Turn Off Voltage (Min): -
• Operate Time: 4ms
• Release Time: 4ms
• Features: Sealed - Hermetically
• Mounting Type: Through Hole
• Termination Style: PC Pin

RELAY GENERAL PURPOSE DPDT 2A

• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: -
• Coil Voltage: -
• Contact Form: DPDT (2 Form C)
• Contact Rating (Current): 2A
• Switching Voltage: 115VAC, 28VDC - Max
• Turn On Voltage (Max): -
• Turn Off Voltage (Min): -
• Operate Time: -
• Release Time: -
• Features: Sealed - Hermetically
• Mounting Type: -
• Termination Style: -

SZ 16 TJ WS DBL W/ RES

• Type: Wire Splice, Resistor
• Contact Size: 16
• Module Capacity: -
• Size / Dimension: 2.840" L x 0.300" W x 0.500" H (72.14mm x 7.62mm x 12.70mm)

CONN RCPT 70POS .050 GOLD

• Connector Type: Receptacle
• Contact Type: Female Socket
• Style: Board to Board
• Number of Positions: 70
• Number of Positions Loaded: All
• Pitch - Mating: 0.050" (1.27mm)
• Number of Rows: 2
• Row Spacing - Mating: 0.150" (3.81mm)
• Mounting Type: Board Edge, Straddle Mount
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Finish - Mating: Gold
• Contact Finish Thickness - Mating: 50µin (1.27µm)
• Insulation Color: Gray
• Insulation Height: -
• Contact Length - Post: -
• Operating Temperature: -
• Material Flammability Rating: -
• Contact Finish - Post: Gold
• Mated Stacking Heights: -
• Ingress Protection: -
• Features: Card Extender, Mating Guide

STL025M6HN = THRU-HOLE

• Connector Type: Receptacle
• Contact Type: Female Socket
• Style: Board to Cable/Wire
• Number of Positions: 25
• Number of Positions Loaded: All
• Pitch - Mating: 0.025" (0.64mm)
• Number of Rows: 2
• Row Spacing - Mating: 0.040" (1.01mm)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Fastening Type: Threaded
• Contact Finish - Mating: Gold
• Contact Finish Thickness - Mating: -
• Insulation Color: -
• Insulation Height: 0.126" (3.20mm)
• Contact Length - Post: 0.090" (2.29mm)
• Operating Temperature: -
• Material Flammability Rating: -
• Contact Finish - Post: Tin-Lead
• Mated Stacking Heights: -
• Ingress Protection: -
• Features: Mating Flange, Mounting Flange

BOX PIN HDR 110 POS W/KEY

• Connector Type: Header
• Contact Type: Male Pin
• Pitch - Mating: 0.100" (2.54mm)
• Style: Board to Board or Cable
• Shrouding: Shrouded - 3 Wall
• Number of Positions: 110
• Number of Positions Loaded: All
• Number of Rows: 2
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Length - Mating: 0.180" (4.59mm)
• Contact Length - Post: 0.135" (3.43mm)
• Overall Contact Length: -
• Insulation Height: 0.330" (8.38mm)
• Contact Shape: Square
• Contact Finish - Mating: Gold
• Contact Finish Thickness - Mating: 50µin (1.27µm)
• Contact Finish - Post: -
• Contact Material: Brass
• Insulation Material: Polyester
• Features: Mating Guide, Mounting Flange
• Operating Temperature: -
• Ingress Protection: -
• Material Flammability Rating: -
• Insulation Color: Blue

I/O CONN

• Connector Type: -
• Contact Type: -
• Number of Positions: -
• Pitch: -
• Number of Rows: -
• Row Spacing: -
• Mounting Type: -
• Fastening Type: -
• Cable Termination: -
• Wire Type: -
• Wire Gauge: -
• Features: -
• Contact Finish: -
• Contact Finish Thickness: -
• Color: -

I/O CONN

• Connector Type: -
• Contact Type: -
• Number of Positions: -
• Pitch: -
• Number of Rows: -
• Row Spacing: -
• Mounting Type: -
• Fastening Type: -
• Cable Termination: -
• Wire Type: -
• Wire Gauge: -
• Features: -
• Contact Finish: -
• Contact Finish Thickness: -
• Color: -

CONN RCPT FOR LGH SOLDER

• Style: LGH 2 and 3
• Connector Type: Receptacle
• Number of Positions: 1
• Shape: Circular
• Barrel Depth: 1.81" (45.97mm)
• Voltage: 40kVDC
• Mounting Type: Free Hanging (In-Line)
• Features: For Encapsulation Unit

CONN D-SUB RCPT HSING 3C3 MIX

• Connector Style: D-Sub, Combo
• Connector Type: Receptacle for Female Contacts
• Number of Positions: 3 (Coax or Power)
• Number of Rows: 1
• Shell Size, Connector Layout: 2 (DA, A) - 3W3
• Contact Type: Coax or Power
• Mounting Type: Free Hanging (In-Line)
• Flange Feature: Housing/Shell (Unthreaded)
• Features: -
• Shell Material, Finish: Steel, Yellow Chromate Plated Zinc
• Shell Finish Thickness: 200µin (5.08µm)
• Ingress Protection: -

CONN D-SUB PLUG 44POS W/OUT PINS

• Connector Style: D-Sub, High Density
• Connector Type: Plug for Male Contacts
• Number of Positions: 44
• Number of Rows: 3
• Shell Size, Connector Layout: 3 (DB, B) High Density
• Contact Type: Signal
• Mounting Type: Free Hanging (In-Line)
• Flange Feature: Housing/Shell (Unthreaded)
• Features: -
• Shell Material, Finish: Steel, Yellow Chromate Plated Zinc
• Shell Finish Thickness: 200µin (5.08µm)
• Ingress Protection: -

CONN SSMA RCPT STR 50 OHM SOLDER

• Connector Style: SSMA
• Connector Type: Receptacle, Female Socket
• Contact Termination: Solder
• Shield Termination: Solder
• Impedance: 50 Ohm
• Mounting Type: Panel Mount
• Mounting Feature: Bulkhead
• Cable Group: -
• Fastening Type: Threaded
• Frequency - Max: 26.5GHz
• Features: Hermetically Sealed
• Housing Color: Silver
• Ingress Protection: -

CONN SSMA RCPT STR 50 OHM SOLDER

• Connector Style: SSMA
• Connector Type: Receptacle, Female Socket
• Contact Termination: Solder Cup
• Shield Termination: Solder
• Impedance: 50 Ohm
• Mounting Type: Panel Mount
• Mounting Feature: Bulkhead - Front Side Nut
• Cable Group: -
• Fastening Type: Threaded
• Frequency - Max: -
• Features: Extended Insulation
• Housing Color: Gold
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 7-12S

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 0.854" (21.70mm)
• Shell Size - Insert: 7, 12, 12S
• Thread Size: 3/4-20 UNEF
• Cable Exit: 180°
• Material: Stainless Steel
• Plating: Passivated
• Shielding: Shielded
• Color: -
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 12 13

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 0.964" (24.50mm)
• Shell Size - Insert: 12, 13
• Thread Size: 11/16-24 UNEF
• Cable Exit: 180°
• Material: Stainless Steel
• Plating: Passivated
• Shielding: Unshielded
• Color: -
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 24 OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.590" (40.39mm)
• Shell Size - Insert: 24
• Thread Size: 1 7/16-18 UNEF
• Cable Exit: 45°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Unshielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ7-12S OLIV

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 0.854" (21.70mm)
• Shell Size - Insert: 7, 12, 12S
• Thread Size: 3/4-20 UNEF
• Cable Exit: 90°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Shielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ7-12S OLIV

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 0.854" (21.70mm)
• Shell Size - Insert: 7, 12, 12S
• Thread Size: 3/4-20 UNEF
• Cable Exit: 90°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Shielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ7-12S SLVR

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 0.854" (21.70mm)
• Shell Size - Insert: 7, 12, 12S
• Thread Size: 3/4-20 UNEF
• Cable Exit: 90°
• Material: Aluminum Alloy
• Plating: Electroless Nickel
• Shielding: Shielded
• Color: Silver
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ8 8S OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 0.614" (15.60mm)
• Shell Size - Insert: 8, 8S
• Thread Size: 1/2-20 UNF
• Cable Exit: 90°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Shielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 16E OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.350" (34.29mm)
• Shell Size - Insert: 16, E
• Thread Size: 1-28 UNEF
• Cable Exit: 90°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Unshielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ16 17 OLIV

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.213" (30.80mm)
• Shell Size - Insert: 16, 17
• Thread Size: 15/16-20 UNEF
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Unshielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 36 OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 2.819" (71.60mm)
• Shell Size - Insert: 36
• Thread Size: 2 5/16-16 UNS
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Shielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 36 OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 2.441" (62.00mm)
• Shell Size - Insert: 36
• Thread Size: 2-18 UNS
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Shielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 18 OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.354" (34.40mm)
• Shell Size - Insert: 18
• Thread Size: 1-20 UNEF
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Unshielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN R/A PLUG DC VITA46

• Connector Usage: Daughtercard
• Connector Type: Plug, Male Blades
• Connector Style: VITA 46, Right End
• Number of Positions: 112
• Number of Positions Loaded: All
• Pitch: 0.071" (1.80mm)
• Number of Rows: 7
• Number of Columns: 16
• Mounting Type: Board Edge, Through Hole, Right Angle
• Termination: Solder
• Contact Layout, Typical: -
• Features: Board Guide
• Contact Finish: Gold
• Contact Finish Thickness: 50µin (1.27µm)
• Color: Black

SKT ASSY SZ 16

• Type: -
• Pin or Socket: Socket
• Contact Termination: -
• Wire Gauge: -
• Contact Finish: Gold
• Contact Finish Thickness: 50µin (1.27µm)