Omron Electronics Inc-EMC Div Products

SWITCH TOGGLE SPDT 100MA 28V

• Circuit: SPDT
• Switch Function: On-On
• Current Rating: 100mA (AC/DC)
• Voltage Rating - AC: 28V
• Voltage Rating - DC: 28V
• Actuator Type: Standard Round
• Actuator Length: 3.80mm
• Illumination: Non-Illuminated
• Illumination Type, Color: -
• Illumination Voltage (Nominal): -
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Panel Cutout Dimensions: -
• Bushing Thread: Unthreaded
• Ingress Protection: IP64 - Dust Tight, Water Resistant
• Features: Sealed - Flux Protection

SWITCH THUMB BCD 0.15A 125V/28V

• Output Code: BCD
• Read Out: 0 ~ 9
• Number of Sections: 1
• Display Characters - Height: 0.268" (6.80mm)
• Actuator Type: Pushwheel
• Contact Rating @ Voltage: 0.15A @ 125VAC/28VDC
• Contact Material: -
• Contact Finish: -
• Mounting Type: Panel Mount, Snap-In
• Termination Style: Card Edge/Solder Pad with Component Mounting
• End Caps: Sold Separately
• Section Width: 0.394" (10.00mm)
• Panel Cutout Dimensions: -
• Features: Diode

SWITCH THUMB BCD 0.1A 50V/28V

• Output Code: BCD
• Read Out: 0 ~ 9
• Number of Sections: 1
• Display Characters - Height: 0.189" (4.80mm)
• Actuator Type: Pushwheel
• Contact Rating @ Voltage: 0.1A @ 50VAC/28VDC
• Contact Material: -
• Contact Finish: -
• Mounting Type: Panel Mount, Snap-In
• Termination Style: Card Edge/Solder Pad with Component Mounting
• End Caps: Sold Separately
• Section Width: 0.315" (8.00mm)
• Panel Cutout Dimensions: -
• Features: Diode

SWITCH SNAP ACTION SPDT 5A 125V

• Circuit: SPDT
• Switch Function: On-Mom
• Current Rating: 5A (AC), 4A (DC)
• Voltage Rating - AC: 125V
• Voltage Rating - DC: 30V
• Actuator Type: Lever, Roller
• Mounting Type: Chassis Mount
• Termination Style: Solder Lug
• Ingress Protection: IP40
• Features: -
• Operating Force, Torque: 50gf
• Release Force: 6gf
• Pretravel: -
• Differential Travel: 0.031" (0.8mm)
• Overtravel: 0.047" (1.2mm)

SWITCH ROCKER SPST 10A 125V

• Circuit: SPST
• Switch Function: On-Off
• Current Rating: 10A (AC)
• Voltage Rating - AC: 125V
• Voltage Rating - DC: -
• Actuator Type: Concave (Curved)
• Color - Actuator/Cap: Black
• Actuator Marking: O I
• Illumination Type, Color: -
• Illumination Voltage (Nominal): -
• Mounting Type: Panel Mount, Snap-In, Right Angle
• Termination Style: PC Pin
• Ingress Protection: -
• Features: -
• Panel Cutout Dimensions: Rectangular - 19.20mm x 17.50mm

RELAY MOSFET SPST 60V .5A SOP4

• Circuit: SPST-NO (1 Form A)
• Output Type: AC, DC
• On-State Resistance (Max): 2 Ohm
• Load Current: 500mA
• Voltage - Input: 1.27VDC
• Voltage - Load: 0 ~ 60 V
• Mounting Type: Surface Mount
• Termination Style: Gull Wing
• Package / Case: 4-SOP (0.179", 4.55mm)
• Supplier Device Package: 4-SOP
• Relay Type: Relay

RELAY RF SPDT 10MA 9V

• Relay Type: RF
• Coil Type: Latching, Dual Coil
• Coil Current: 40mA
• Coil Voltage: 9VDC
• Contact Form: SPDT (1 Form C)
• Contact Rating (Current): 10mA
• Switching Voltage: 30VAC, 30VDC - Max
• Turn On Voltage (Max): 7.2 VDC
• Turn Off Voltage (Min): -
• Operate Time: 10ms
• Release Time: 10ms
• Features: Sealed - Fully
• Mounting Type: Surface Mount
• Termination Style: Gull Wing

RELAY TELECOM DPDT 2A 3V

• Relay Type: Telecom
• Coil Type: Non Latching
• Coil Current: 46.7mA
• Coil Voltage: 3VDC
• Contact Form: DPDT (2 Form C)
• Contact Rating (Current): 2A
• Switching Voltage: 250VAC, 220VDC - Max
• Turn On Voltage (Max): 2.25 VDC
• Turn Off Voltage (Min): 0.3 VDC
• Operate Time: 4ms
• Release Time: 4ms
• Features: -
• Mounting Type: Surface Mount
• Termination Style: Gull Wing

RELAY GEN PURPOSE SPDT 10A 18V

• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: 50mA
• Coil Voltage: 18VDC
• Contact Form: SPDT (1 Form C)
• Contact Rating (Current): 10A
• Switching Voltage: 250VAC, 28VDC - Max
• Turn On Voltage (Max): 13.5 VDC
• Turn Off Voltage (Min): 1.8 VDC
• Operate Time: 15ms
• Release Time: 10ms
• Features: Insulation - Class F
• Mounting Type: Through Hole
• Termination Style: PC Pin, Quick Connect - 0.250" (6.3mm)

RELAY GEN PURPOSE DPST 8A 24V

• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: 16.7mA
• Coil Voltage: 24VDC
• Contact Form: DPST (2 Form A)
• Contact Rating (Current): 8A
• Switching Voltage: 440VAC, 300VDC - Max
• Turn On Voltage (Max): 16.8 VDC
• Turn Off Voltage (Min): 2.4 VDC
• Operate Time: 15ms
• Release Time: 5ms
• Features: Insulation - Class F, Sealed - Fully
• Mounting Type: Through Hole
• Termination Style: PC Pin

RELAY SAFETY DPST 5A 24V

• Relay Type: Safety
• Coil Type: Non Latching
• Coil Current: 6mA
• Coil Voltage: 24VDC
• Contact Form: DPST (2 Form A)
• Contact Rating (Current): 5A
• Switching Voltage: 250VAC, 30VDC - Max
• Turn On Voltage (Max): 14.4 VDC
• Turn Off Voltage (Min): 5 VDC
• Operate Time: 8ms
• Release Time: 8ms
• Features: -
• Mounting Type: DIN Rail
• Termination Style: Screw Terminal

RELAY GEN PURPOSE SPST 30A 50V

• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: 34mA
• Coil Voltage: 50VAC
• Contact Form: SPST-NO (1 Form A)
• Contact Rating (Current): 30A
• Switching Voltage: 250VAC - Max
• Turn On Voltage (Max): 37.5 VAC
• Turn Off Voltage (Min): 7.5 VAC
• Operate Time: 30ms
• Release Time: 30ms
• Features: Insulation - Class B
• Mounting Type: Chassis Mount
• Termination Style: Quick Connect - 0.250" (6.3mm)

RELAY GENERAL PURPOSE DPST 8A 5V

• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: 40mA
• Coil Voltage: 5VDC
• Contact Form: DPST-NO/NC (1 Form A and B)
• Contact Rating (Current): 8A
• Switching Voltage: 380VAC, 125VDC - Max
• Turn On Voltage (Max): 3.5 VDC
• Turn Off Voltage (Min): 0.5 VDC
• Operate Time: 10ms
• Release Time: 10ms
• Features: Sealed - Flux Protection
• Mounting Type: Through Hole
• Termination Style: PC Pin

RELAY GEN PURPOSE SPDT 8A 24V

• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: 37.5mA
• Coil Voltage: 24VAC
• Contact Form: SPDT (1 Form C)
• Contact Rating (Current): 8A
• Switching Voltage: 380VAC, 125VDC - Max
• Turn On Voltage (Max): 19.2 VAC
• Turn Off Voltage (Min): 7.2 VAC
• Operate Time: 15ms
• Release Time: 10ms
• Features: Sealed - Fully
• Mounting Type: Through Hole
• Termination Style: PC Pin

RELAY GEN PURPOSE DPST 5A 24V

• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: 12.5mA
• Coil Voltage: 24VDC
• Contact Form: DPST (2 Form B)
• Contact Rating (Current): 5A
• Switching Voltage: 380VAC, 125VDC - Max
• Turn On Voltage (Max): 19.2 VDC
• Turn Off Voltage (Min): 2.4 VDC
• Operate Time: 10ms
• Release Time: 10ms
• Features: Sealed - Fully, Socket Included
• Mounting Type: Through Hole
• Termination Style: PC Pin

RELAY GEN PURPOSE SPST 10A 12V

• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: 12.5mA
• Coil Voltage: 12VDC
• Contact Form: SPST-NO (1 Form A)
• Contact Rating (Current): 10A
• Switching Voltage: 250VAC, 125VDC - Max
• Turn On Voltage (Max): 9.6 VDC
• Turn Off Voltage (Min): 1.2 VDC
• Operate Time: 15ms
• Release Time: 10ms
• Features: Sealed - Flux Protection
• Mounting Type: Through Hole
• Termination Style: PC Pin

RELAY GEN PURPOSE DPST 8A 12V

• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: 33.3mA
• Coil Voltage: 12VDC
• Contact Form: DPST (2 Form A)
• Contact Rating (Current): 8A
• Switching Voltage: 440VAC, 300VDC - Max
• Turn On Voltage (Max): 8.4 VDC
• Turn Off Voltage (Min): 1.2 VDC
• Operate Time: 15ms
• Release Time: 5ms
• Features: Insulation - Class B, Sealed - Fully
• Mounting Type: Through Hole
• Termination Style: PC Pin

RELAY GEN PURPOSE SPST 5A 24V

• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: 8.3mA
• Coil Voltage: 24VDC
• Contact Form: SPST-NO (1 Form A)
• Contact Rating (Current): 5A
• Switching Voltage: 250VAC, 30VDC - Max
• Turn On Voltage (Max): 18 VDC
• Turn Off Voltage (Min): 2.4 VDC
• Operate Time: 10ms
• Release Time: 10ms
• Features: Sealed - Fully
• Mounting Type: Through Hole
• Termination Style: PC Pin

RELAY GENERAL PURPOSE SPDT 5V

• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: -
• Coil Voltage: 5VDC
• Contact Form: SPDT (1 Form C)
• Contact Rating (Current): -
• Switching Voltage: 250VAC, 30VDC - Max
• Turn On Voltage (Max): 3.75 VDC
• Turn Off Voltage (Min): 0.25 VDC
• Operate Time: 10ms
• Release Time: 5ms
• Features: Sealed - Fully
• Mounting Type: Through Hole
• Termination Style: PC Pin

RELAY GEN PURPOSE SPDT 10A 12V

• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: 33.3mA
• Coil Voltage: 12VDC
• Contact Form: SPDT (1 Form C)
• Contact Rating (Current): 10A
• Switching Voltage: 250VAC, 125VDC - Max
• Turn On Voltage (Max): 9 VDC
• Turn Off Voltage (Min): 1.2 VDC
• Operate Time: 10ms
• Release Time: 5ms
• Features: Insulation - Class F, Sealed - Flux Protection
• Mounting Type: Through Hole
• Termination Style: PC Pin

JUMPER PLUG 8POS SING ROW

• Connector Type: Header
• Contact Type: Male Pin
• Pitch - Mating: 0.100" (2.54mm)
• Style: Board to Board or Cable
• Shrouding: Unshrouded
• Number of Positions: 8
• Number of Positions Loaded: All
• Number of Rows: 1
• Row Spacing - Mating: -
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Length - Mating: 0.169" (4.30mm)
• Contact Length - Post: 0.118" (3.00mm)
• Overall Contact Length: 0.386" (9.80mm)
• Insulation Height: 0.098" (2.50mm)
• Contact Shape: Square
• Contact Finish - Mating: Tin
• Contact Finish Thickness - Mating: -
• Contact Finish - Post: Tin
• Contact Material: Brass, Nickel
• Insulation Material: Polybutylene Terephthalate (PBT), Glass Filled
• Features: -
• Operating Temperature: -55°C ~ 105°C
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0
• Insulation Color: Black

CONN SOCKET IDC 30POS .1X.1

• Connector Type: Ribbon Cable, DIP Header
• Number of Positions: 30
• Cable Pitch: 0.050" (1.27mm)
• Board-Side Pitch: 0.100" (2.54mm)
• Number of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Cable Termination: IDC
• Wire Gauge: 28 AWG
• Features: Feed Through
• Contact Finish: Tin
• Contact Finish Thickness: -
• Color: Black

CONN FPC 40POS 0.50MM R/A

• Flat Flex Type: FPC
• Mounting Type: Surface Mount, Right Angle
• Connector/Contact Type: Contacts, Top and Bottom
• Number of Positions: 40
• Pitch: 0.020" (0.50mm)
• Termination: Solder
• FFC, FCB Thickness: 0.30mm
• Height Above Board: 0.083" (2.10mm)
• Locking Feature: Rotary Lock, Backlock
• Cable End Type: Tapered
• Contact Material: Copper Alloy
• Contact Finish: Solder Plating
• Housing Material: Liquid Crystal Polymer (LCP)
• Actuator Material: Liquid Crystal Polymer (LCP)
• Features: -
• Voltage Rating: 50V
• Operating Temperature: -30°C ~ 85°C
• Material Flammability Rating: UL94 V-0

CONN FPC 21POS 0.50MM R/A

• Flat Flex Type: FPC
• Mounting Type: Surface Mount, Right Angle
• Connector/Contact Type: Contacts, Top and Bottom
• Number of Positions: 21
• Pitch: 0.020" (0.50mm)
• Termination: Solder
• FFC, FCB Thickness: 0.20mm
• Height Above Board: -
• Locking Feature: Rotary Lock, Backlock
• Cable End Type: Straight
• Contact Material: Copper Alloy
• Contact Finish: Gold
• Housing Material: Liquid Crystal Polymer (LCP)
• Actuator Material: Liquid Crystal Polymer (LCP)
• Features: Solder Retention
• Voltage Rating: 50V
• Operating Temperature: -30°C ~ 85°C
• Material Flammability Rating: UL94 V-0

CONN D-SUB RCPT 37POS VERT SLDR

• Connector Style: D-Sub
• Connector Type: Receptacle, Female Sockets
• Number of Positions: 37
• Number of Rows: 2
• Shell Size, Connector Layout: 4 (DC, C)
• Contact Type: Signal
• Mounting Type: Through Hole
• Flange Feature: Mating Side, Female Screwlock (4-40)
• Termination: Solder
• Features: Board Lock, Shielded
• Shell Material, Finish: Steel, Tin Plated
• Contact Finish: Gold
• Contact Finish Thickness: 16µin (0.40µm)
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0

CONN D-SUB PLUG 15POS R/A SOLDER

• Connector Style: D-Sub
• Connector Type: Plug, Male Pins
• Number of Positions: 15
• Number of Rows: 2
• Shell Size, Connector Layout: 2 (DA, A)
• Contact Type: Signal
• Mounting Type: Panel Mount, Through Hole, Right Angle
• Flange Feature: Mating Side, Female Screwlock (4-40)
• Termination: Solder
• Features: Board Lock, Shielded
• Shell Material, Finish: Steel, Nickel Plated
• Contact Finish: Gold
• Contact Finish Thickness: 16µin (0.40µm)
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0

CONTACT PROBE 1.0MM PITCH

• Material: Nickel Alloy
• Plating: Gold
• Plating - Thickness: 40µin (1.02µm)
• Mounting Type: Through Hole

CONTACT PROBE PIN .4MM PITCH

• Material: Nickel Alloy
• Plating: Gold
• Plating - Thickness: -
• Mounting Type: Through Hole