TE Connectivity Aerospace, Defense and Marine Products

SOLID STATE RELAY 10A/250VAC

• Circuit: SPST-NO (1 Form A)
• Output Type: AC, Zero Cross
• On-State Resistance (Max): -
• Load Current: 10A
• Voltage - Input: 3.8 ~ 32VDC
• Voltage - Load: 0 ~ 250 V
• Mounting Type: Chassis Mount or Panel Mount
• Termination Style: Screw Terminal
• Package / Case: Module
• Supplier Device Package: -
• Relay Type: Relay

RELAY GENERAL PURPOSE DPDT 2A

• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: -
• Coil Voltage: -
• Contact Form: DPDT (2 Form C)
• Contact Rating (Current): 2A
• Switching Voltage: 115VAC, 28VDC - Max
• Turn On Voltage (Max): -
• Turn Off Voltage (Min): -
• Operate Time: -
• Release Time: -
• Features: Sealed - Hermetically
• Mounting Type: -
• Termination Style: -

RELAY GEN PURPOSE DPDT 4A 26.5V

• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: 44.2mA
• Coil Voltage: 26.5VDC
• Contact Form: DPDT (2 Form C)
• Contact Rating (Current): 4A
• Switching Voltage: 28VDC - Max
• Turn On Voltage (Max): 13.4 VDC
• Turn Off Voltage (Min): 1.5 VDC
• Operate Time: 4ms
• Release Time: 4ms
• Features: Sealed - Hermetically
• Mounting Type: Chassis Mount
• Termination Style: Solder Hook

TJ F/B 20E SPEC 4 DIODES

• Type: -
• Contact Size: -
• Module Capacity: -
• Size / Dimension: -

TJ F/B 20 W/DIODE SPEC MARK

• Type: Feedback Module Block
• Contact Size: 20
• Module Capacity: -
• Size / Dimension: 0.850" L x 0.390" W x 0.847" H (21.59mm x 9.91mm x 21.51mm)

I/O CONN

• Connector Type: -
• Contact Type: -
• Number of Positions: -
• Pitch: -
• Number of Rows: -
• Row Spacing: -
• Mounting Type: -
• Fastening Type: -
• Cable Termination: -
• Wire Type: -
• Wire Gauge: -
• Features: -
• Contact Finish: -
• Contact Finish Thickness: -
• Color: -

CONN D-SUB PLUG HSING 25POS STD

• Connector Style: D-Sub
• Connector Type: Plug for Male Contacts
• Number of Positions: 25
• Number of Rows: 2
• Shell Size, Connector Layout: 3 (DB, B)
• Contact Type: Signal
• Mounting Type: Free Hanging (In-Line)
• Flange Feature: Housing/Shell (Unthreaded)
• Features: -
• Shell Material, Finish: Aluminum Alloy (Front) / Steel (Rear), Yellow Cadmium Plated
• Shell Finish Thickness: -
• Ingress Protection: -

CONN D-SUB RCPT HSING 5C5 COAX

• Connector Style: D-Sub, Combo
• Connector Type: Receptacle for Female Contacts
• Number of Positions: 5 (Coax or Power)
• Number of Rows: 1
• Shell Size, Connector Layout: 3 (DB, B) - 5W5
• Contact Type: Coax or Power
• Mounting Type: Free Hanging (In-Line)
• Flange Feature: Housing/Shell (Unthreaded)
• Features: -
• Shell Material, Finish: Brass, Gold Plated
• Shell Finish Thickness: -
• Ingress Protection: -

CONN D-SUB HOUSING PLUG 9POS

• Connector Style: D-Sub
• Connector Type: Plug for Male Contacts
• Number of Positions: 9
• Number of Rows: 2
• Shell Size, Connector Layout: 1 (DE, E)
• Contact Type: Signal
• Mounting Type: Free Hanging (In-Line)
• Flange Feature: Housing/Shell (Unthreaded)
• Features: -
• Shell Material, Finish: Steel, Yellow Chromate Plated Zinc
• Shell Finish Thickness: 20µin (0.51µm)
• Ingress Protection: -

CONN SMA PLUG STR 50 OHM

• Connector Style: SMB
• Connector Type: Plug, Male Pin
• Contact Termination: Solder
• Shield Termination: Crimp
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line)
• Mounting Feature: -
• Cable Group: -
• Fastening Type: Threaded
• Frequency - Max: -
• Features: -
• Housing Color: Silver
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 32

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 2.220" (56.40mm)
• Shell Size - Insert: 32
• Thread Size: 1 7/8-16 UN
• Cable Exit: 90°
• Material: Stainless Steel
• Plating: Passivated
• Shielding: Shielded
• Color: -
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 19F SLVR

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.398" (35.50mm)
• Shell Size - Insert: 19, F
• Thread Size: M28x1
• Cable Exit: 90°
• Material: Stainless Steel
• Plating: Electroless Nickel
• Shielding: Unshielded
• Color: Silver
• Features: Tinel Lock
• Ingress Protection: Environment Resistant

CONN BACKSHELL ADPT SZ 16-19

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.110" (28.19mm)
• Shell Size - Insert: 16, 16S, 19
• Thread Size: 1-20 UNEF
• Cable Exit: 90°
• Material: Stainless Steel
• Plating: Passivated
• Shielding: Unshielded
• Color: -
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 36

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 2.468" (62.70mm)
• Shell Size - Insert: 36
• Thread Size: 2 1/16-16 UNS
• Cable Exit: 180°
• Material: Stainless Steel
• Plating: Passivated
• Shielding: Shielded
• Color: -
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 19F M28

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.398" (35.50mm)
• Shell Size - Insert: 19, F
• Thread Size: M28x1
• Cable Exit: 180°
• Material: Nickel Aluminum Bronze
• Plating: -
• Shielding: Unshielded
• Color: -
• Features: Tinel Lock
• Ingress Protection: Environment Resistant

CONN BACKSHELL ADPT SZ 18 19

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.343" (34.10mm)
• Shell Size - Insert: 18, 19
• Thread Size: 1 1/16-18 UNEF
• Cable Exit: 180°
• Material: Stainless Steel
• Plating: Passivated
• Shielding: Shielded
• Color: -
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 17E OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.279" (32.49mm)
• Shell Size - Insert: 17, E
• Thread Size: M25x1
• Cable Exit: 90°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Unshielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: Environment Resistant

CONN BACKSHELL ADPT SZ20 37 OLIV

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.343" (34.10mm)
• Shell Size - Insert: 20, 37
• Thread Size: 1 3/16-18 UNEF
• Cable Exit: 45°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Unshielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 25J OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.713" (43.50mm)
• Shell Size - Insert: 25, J
• Thread Size: M37x1
• Cable Exit: 90°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Shielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: Environment Resistant

CONN BACKSHELL ADPT OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: -
• Shell Size - Insert: -
• Thread Size: -
• Cable Exit: 90°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Shielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 24 OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.590" (40.39mm)
• Shell Size - Insert: 24
• Thread Size: 1 7/16-18 UNEF
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Unshielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 16 OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.222" (31.05mm)
• Shell Size - Insert: 16
• Thread Size: 15/16-20 UNEF
• Cable Exit: 45°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Unshielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 15D OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.142" (29.00mm)
• Shell Size - Insert: 15, D
• Thread Size: M22x1
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Shielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: Environment Resistant

CONN BACKSHELL ADPT SZ 22 OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 1.596" (40.55mm)
• Shell Size - Insert: 22
• Thread Size: 1 5/16-18 UNEF
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Shielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 13C OLIVE

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 0.964" (24.50mm)
• Shell Size - Insert: 13, C
• Thread Size: M18x1
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Shielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: Environment Resistant

CONN BACKSHELL ADPT SZ12 13 OLIV

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 0.964" (24.50mm)
• Shell Size - Insert: 12, 13
• Thread Size: 11/16-24 UNEF
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Shielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

HEAT SHRINK TUBING

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: -
• Shell Size - Insert: 20
• Thread Size: -
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Cadmium
• Shielding: Shielded
• Color: Olive Drab
• Features: Tinel Lock
• Ingress Protection: -

CONN BACKSHELL ADPT SZ 8 9 SLVR

• Type: Backshell, Heat Shrink Adapter
• Cable Opening: -
• Diameter - Outside: 0.720" (18.29mm)
• Shell Size - Insert: 8, 9
• Thread Size: 7/16-28 UNEF
• Cable Exit: 180°
• Material: Aluminum Alloy
• Plating: Electroless Nickel
• Shielding: Shielded
• Color: Silver
• Features: Tinel Lock
• Ingress Protection: -