Latest Technologies of Infineon Technologies

2023-04-20, Infineon promotes complex motor control and other high-performance industrial applications with the introduction of the XMC7000 series MCU

Infineon's industrial-grade microcontroller (MCU) portfolio XMC7000. By providing performance advantages such as higher computing performance, richer peripherals, and wider operating temperature range, the series of products can meet the demands of advanced industrial applications for high performance, high scalability, and harsh working environments.

2023-04-18, Infineon introduces 256 Mbit SEMPER™ Nano NOR Flash memory

Infineon Technologies introduces SEMPER™ Nano NOR Flash memory. The memory is specially optimized for use in small, battery-powered electronic devices. New wearable and industrial applications such as fitness trackers, smart headsets, health monitors, drones and GPS navigation are emerging, helping to achieve more functions such as accurate tracking, recording critical information, enhancing security and reducing noise

2023-04-17, Infineon has introduced SECORA™ Connect X, an all-in-one turnkey NFC solution

Infineon has introduced SECORA™ Connect X, an all-in-one turnkey NFC solution. This ultra-low-power enhanced NFC solution clears the way for EMVCo standards-based payments.

2023-04-11, Simple, high performance step-down LED driver solution

The IRS2980S utilized the control and high voltage technologies of International Rectifier Corporation to achieve a simple, high-performance step-down LED driver solution. The solution is based on hysteresis output current regulation and typically operates in the range of 25 kHz to 120 kHz.

2023-04-01, Three phase locked loop universal flash programmable clock generator

The CY22381 is a next-generation programmable Flash programmable clock for networking, telecommunications, data communications, and other general purpose applications. The CY22381 offers up to three configurable outputs in an 8-pin SOIC, powered by a 3.3V power supply.

2023-03-21, High power, high speed power MOSFET driver

The IR2011 is a high-power, high-speed power MOSFET driver with a separate high-low side reference output channel. A floating channel can be used to drive a high-side configuration of N-channel power mosFETs that operate at up to 200 volts. Proprietary HVIC and latch-immune CMOS technology enable a rugged overall structure.

2023-03-06, Integrated power hybrid integrated circuits for electric motor drives of household appliances

IRAM336-025SB is a multi-chip hybrid IC for low power electrical motor control applications such as fans, pumps and refrigerator compressors. A compact Single in line (SIP-S) package minimizes PCB space. Several built-in protection features such as temperature feedback, shot prevention, undervoltage locking and shutdown input make this a very powerful solution.

2023-03-03, Digital polyphase memory/mobile controller

The IR3596 is a flexible single-loop digital polyphase step-down controller that can be configured as a 1, 2 or 3 phase system when combined with an IR Dual 6x8mm IR3548 or IR355x power level. Power consumption is minimized while maintaining full digital capability and flexibility. Digital nonlinear transient control allows low frequency operations to achieve maximum efficiency while providing minimal all-ceramic output capacitance solutions.

2023-02-11, 5-bit programmable synchronous step-down controller Integrated circuit with triple ldo controller

The IRU3027 controller IC is specifically designed to meet VRM 9.0 specification for next generation microprocessor applications requiring multiple on-board regulators. The IRU3027 provides a single chip controller IC for the Vcore, three LDO controllers, one with an automatic select pin that connects to the Type Detect pin of the AGP slot for the AGP VDDQ supply, one for GTL+ and the other for the 1.8V chip set regulator as required for the next generation PC applications.

2023-01-31, Unipolar normally open solid-state relay

The PVG612 Series Photovoltaic Relay is a singlepole, normally open solid-state relay that can replace electromechanical relays in many applications. It utilizes International Rectifier’s proprietary HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator.

2022-12-22, The flexibility of the new microcontroller for high-end applications

The XMC7200 is the XMC7000 microcontroller family for industrial applications. The XMC7200 has two Arm Cortex-M7 cpus for primary processing and one Arm Cortex-M0+ CPU for peripherals and security processing. These devices include embedded peripherals that support controller Area Networks (CAN FD) with flexible data rates and Gigabit Ethernet.

2022-12-02, Infineon introduces the XENSIV TLE4971 series magnetic current sensor for vehicles

Infineon Technologies has announced the launch of the new XENSIV TLE4971 series of magnetic current sensors to further enrich its automotive current sensor portfolio. The series of magnetic current sensors can also be used in a variety of industrial applications, such as electric vehicle DC chargers, industrial drivers, servo drivers, photovoltaic inverters, etc.

2022-12-01, 5 bit programmable synchronous Buck controller IC with triple ldo controller

2022-11-28, Infineon has introduced a new series of 2 x 37 W audio amplifiers using the second generation MERUS multilevel switching technology

The MERUS multi-level switching technology launched by Infineon Technology Co., Ltd. aims to reduce switching loss and achieve efficient audio amplification performance at low output power and high output power, bringing significant advantages to such applications.

2022-11-26, Infineon launched XMC7000 series microcontroller for industrial applications

Infineon Technologies has launched the XMC7000 series microcontroller (MCU) for industrial drive, electric vehicle (EV) charging, electric two-wheelers, robotics and other advanced industrial applications.

2022-11-25, Infineon introduces the industry's first PFC and hybrid flyback combined IC

XDPS2221 PWM controller is a highly integrated device, which combines a multi-mode AC DC PFC controller and a multi-mode DC DC hybrid flyback controller. The integration of PFC and hybrid flyback into a single package can reduce the bill of external material components and optimize the system performance in two stages.

2022-11-25, Infineon Technologies EVAL-M1-IM323 evaluation board

Infineon Technologies EVAL-M1-IM323 Evaluation Board was developed to support users in designing 3-phase motor drive applications with the IM323. The IM323 CIPOS tiny 3-phase inverter module delivers a high power density variable speed motor drive.

2022-11-24, Infineon launched the industry's first wide voltage, programmable digital SOA controlled hot plug controller

The continued demand for artificial intelligence (AI) services in high performance computing (HPC) data centers is driving the growth of the market in this area. Dedicated AI accelerators can help dramatically improve the performance and efficiency of these data centers. As with many critical infrastructure systems, reliability and high availability are essential to these data centers, but extremely difficult to achieve.