Latest Technologies

IR2102 Driver: Pinout, Typical Connection and Applications

The IR2102 is a high-voltage, high-speed gate driver designed for controlling power MOSFETs and IGBTs with independent high-side and low-side output channels.

TDA7560 Amplifier: Introduction, Pinout and Features

The TDA7560 is a high-performance Class AB audio power amplifier built using advanced BCD (Bipolar, CMOS, DMOS) technology.

IR2184S Driver: Introduction, Pinout and Applications[FAQs]

The IR2184S is a high-speed, high-voltage power MOSFET and IGBT driver, designed for driving both high-side and low-side channels in power electronics applications.

IR2113 Driver: Pinou, Test Circuit and Guide

The IR2113 is versatile, high-voltage, high-speed drivers designed to control power MOSFETs and IGBTs with precision and efficiency.

UA741CN Operational Amplifier: Pinout, Schematic Diagram and Applications

The UA741CN is a high-performance monolithic operational amplifier built on a single silicon chip, designed for a broad spectrum of analog applications. It features a high gain and operates across a wide range of voltages, making it exceptionally suitable for use in integrators, summing amplifiers, and general feedback circuits.

W9751G6KB-25 Chip: Pin Configuration, Features and Package [FAQs]

The W9751G6KB-25 is a 512Mbit DDR2 SDRAM chip organized into 8,388,608 words across 4 banks, each 16 bits wide. It supports high-speed data transfer rates of up to 1066Mb/sec per pin (DDR2-1066), making it suitable for a variety of general applications.

LM2940S-5.0 Voltage Regulator: Basics, Pin Configuration & Features

The LM2940S-5.0 is a positive voltage regulator capable of delivering up to 1 A of output current, with a typical dropout voltage of 0.5 V and a maximum of 1 V across the entire temperature range.

NJM4556AL Operational Amplifier: Pin Configuration, Circuit & Applications

The NJM4556AL is a high-gain, high-output current dual operational amplifier designed to drive heavy loads with ease, including up to ±70mA into 150Ω loads, achieving an output voltage of ±10.5V. It supports low supply voltage operation, working effectively at ±2V or higher.

KA7500B Control IC: Pinout, Circuit & Applications [FAQs]

The KA7500B is a pulse-width modulation (PWM) control integrated circuit, primarily used in switch-mode power supplies and DC-DC converters. It has the capability to regulate output voltage and control power efficiency.

BDW93C Transistor: Basics, Pinout and Specification

ICL8038CCPD IC: Pinout, Test Circuit & Applications

The ICL8038CCPD is a versatile waveform generator IC that can produce highly accurate sine, square, triangular, sawtooth, and pulse waveforms with minimal external components.

BCP53 PNP Transistor: Pinout, Features & Usage Tips

The BCP53 is a PNP silicon epitaxial transistor for audio amplifier applications. It’s designed for high current handling and moderate voltage capabilities, making it ideal for driving loads like small motors, relays, or LEDs.

TEA2025B Monolithic IC: Working Principle, Pinout and Alternatives

The TEA2025B is a versatile monolithic IC housed in a 12+2+2 Powerdip package, specifically for use as a dual or bridge power audio amplifier.

L9637D Monolithic IC: Introduction, Pinout and Specification

The L9637D is a monolithic integrated circuit, supporting the ISO 9141 standard for efficient communication between vehicles and diagnostic tools.

TDA7379 Amplifier: Pinout, Circuits and Applications

The TDA7379 is an automotive audio amplifier for car audio systems. It can provide high output power, typically achieving 4×45W, making it suitable for driving various speaker configurations.

IR2153 Drive IC: Introduction, Pinout and Features

The IR2153 is an enhanced version of the widely-used IR2155 and IR2151 gate driver ICs, integrating a high-voltage half-bridge gate driver and a front-end oscillator, similar to the CMOS 555 timer. This improved design offers greater functionality and ease of use compared to its predecessors.

THGBMJG6C1LBAIL e-MMC: Pinout, Model and Features

THGBMJG6C1LBAIL Introduction THGBMFG6C1LBAIL is an 8GB density e-MMC (embedded MultiMediaCard) module, housed in a compact 153-ball BGA (Ball Grid Array) package.

LM723CN Voltage Regulator: Pinout, Circuit and Applications

The LM723 is a monolithic integrated programmable voltage regulator, available in a 14-lead dual in-line plastic package and an SO-14 micro package.