Latest Technologies of Sensirion AG

Records 15

Page 1/1

2023-05-10, ScioSense introduces low-power gas sensor

ScioSense, the industry leader in environmental and high-precision flow and time measurement sensor chips, announced the introduction of ENS161, a low-power, multi-gas sensor that enables continuous air quality monitoring in wearable and portable devices powered only by small capacity batteries.
2023-04-21, Sensirion develops new sensors for high velocity measurements

Sensirion has successfully developed a new high velocity measurement sensor, the SLF3S-4000B, with an innovative design that can measure fluid velocities up to 1 L/min, extending thermal flow measurement to laboratory analysis and industry. With this highly cost-effective liquid flow sensor, Sensirion fills a gap in the market for high velocity flow measurement sensors in laboratory analysis and industry. It is capable of accurately measuring velocities up to 1 L/min with Sensirion's usual high quality, and is only 5 cm long and weighs only 7 grams.
2022-11-14, Sensirion provides a complete set of reliable indoor air quality sensors

As experts in environmental sensing, Sensirion offers a complete portfolio of reliable indoor air quality sensors. The miniaturized air quality sensors monitor important air pollutions such as carbon dioxide (CO2), particulate matter (PM),
2022-10-08, The environment sensor designed for HVAC and air quality application

Seeed Studio has released the Grove all-in-one environmental sensors featuring Sensirion’s SEN54 and SEN55 environmental sensor nodes. The sensors detect multiple indoor air quality parameters and are intended for HVAC and air quality applications.
2022-08-25, Sensirion Introduces In-Line Gas Chromatograph for Natural Gas Analysis

The new gas analyzer DynamIQ-X NG2210 can quickly and accurately monitor natural gas online and provide calorific value for composition control and trade measurement handover. Meanwhile, DynamiQ-X NG2220 can analyze hydrogen-doped natural gas with a concentration of up to 20% using only one carrier gas. Both products can accommodate two to three GC units operating in parallel, each of which can perform a different GC analysis under its own optimized conditions.
2022-08-20, A new gas chromatograph for linear natural gas analysis

The new gas analyser DynamiQ-X NG2210, from Qmicro by Sensirion, offers fast and accurate online monitoring of natural gas and provides calorific values for composition control and custody transfer purposes.
2022-07-04, Fourth generation digital humidity sensor for automotive applications

Sensirion has added the digital automotive sensor SHT4xA to its range of humidity and temperature sensors. With integrated diagnostic capability, AEC-Q100 product qualification, optional wettable flanks and low annual drift, the device sets the highest standards for demanding applications.
2022-05-07, A new version of the Environment Sensor Node is now available

The Sensirion environmental Sensor Node is intended for use in indoor air quality applications. Provides an intuitive sensor solution platform for accurate measurement of particulate matter. In addition to particulate matter, the device can also detect other environmental parameters such as VOCs, NOx, humidity and temperature. End customers receive reliable air quality measurements and benefit from an improved indoor environment that makes them healthier and more comfortable.
2022-05-01, Small and cost-effective temperature sensor available worldwide

Sensirion now offers its fourth generation temperature sensor series, the STS4x. Due to its small size, cost effectiveness and low power consumption, the device is ideal for mass production and battery driven design. All sensors in the STS4x family offer top performance with enhanced signal processing, three unique I2C addresses and communication speeds up to 1MHz. In addition, with a footprint of just 1.5mm x 1.5mm x 0.5mm3, the DFN package can be easily integrated into different applications.
2022-03-28, New VOC+NOx sensor, suitable for indoor air quality

Sensirion has introduced the SGP41 VOC+NOx sensor for indoor air quality. The sensor provides a solution of two complete sensors on a single chip for easy design and reduced design costs. Digital intelligent switches and adjustment units used in air treatment equipment such as air purifiers.
2022-03-01, Quick and easy method to evaluate liquid flow assessment kit

Sek-ld20-0600l and SEK-LD20-2600B Liquid Flow Evaluation Kit, the kit provides engineers with a quick and easy way to evaluate the functionality of the LD20-0600L and LD20-2600B liquid flow sensors. Each kit includes three liquid flow sensors, three LD20 base stations and PC software
2021-12-10, The digital liquid flow sensor has good repeatability

Sensirion LPG10-1000 Digital Planar Liquid Flow Sensor, available now from Mouser, offers high performance and speed in measuring liquid flow in a planar microfluidic glass substrate with down-mount fluidic ports for extremely compact integration into any fluidic manifold system.
2021-12-02, Provides ultra-low power industrial edge ai sensing applications

SensiML has partnered with Onsemi to provide a complete machine learning solution for autonomous sensor data processing and predictive modeling. The collaboration combines the Analytics Toolkit development software with Onsemi's RSL10 sensor development kit, providing a perfect platform for edge sensing applications
2021-10-17, Flowmeters for medical devices and industrial applications

Mouser offers the SFM series of digital flow meters that provide a digital I²C interface and CMOSens patented technology for medical and industrial applications
2021-10-15, The torque sensor has an independent sensing head to probe deep inside the machine

Sensor Technology has expanded its new line of torque sensors and offers Sensor heads and electronics in separate enclosures. They each have their merits. The new series TorqSense SGR530/540 meets the needs of new users, especially for accurate recording of transient torque peaks.

Latest Technologies of Sensirion AG

2023-05-10, ScioSense introduces low-power gas sensor

2023-04-21, Sensirion develops new sensors for high velocity measurements

2022-11-14, Sensirion provides a complete set of reliable indoor air quality sensors

2022-10-08, The environment sensor designed for HVAC and air quality application

2022-08-25, Sensirion Introduces In-Line Gas Chromatograph for Natural Gas Analysis

2022-08-20, A new gas chromatograph for linear natural gas analysis

2022-07-04, Fourth generation digital humidity sensor for automotive applications

2022-05-07, A new version of the Environment Sensor Node is now available

2022-05-01, Small and cost-effective temperature sensor available worldwide

2022-03-28, New VOC+NOx sensor, suitable for indoor air quality

2022-03-01, Quick and easy method to evaluate liquid flow assessment kit

2021-12-10, The digital liquid flow sensor has good repeatability

2021-12-02, Provides ultra-low power industrial edge ai sensing applications

2021-10-17, Flowmeters for medical devices and industrial applications

2021-10-15, The torque sensor has an independent sensing head to probe deep inside the machine