Latest Technologies of Maxim Integrated

Records 89

Page 1/5

2024-07-15, DS1302 Pinout, Block Diagram and Applications[FAQs]

The DS1302 is a low-power, real-time clock (RTC) IC from Maxim Integrated to keep track of time and date in a variety of electronic systems. It features a 31 x 8 RAM for temporary data storage, a trickle-charge capability to support a backup power source, and a serial interface for communication with a microcontroller.
2024-06-25, DS12C887 Principle, Specifications and Operating Circuit

The DS12C887 is a real-time clock (RTC) chip which provides essential timekeeping functions, including a real-time clock/calendar, one time-of-day alarm, three maskable interrupts with a common interrupt output, a programmable square wave, and 113 bytes of battery-backed static RAM. Notably, the DS12C887 adds a century byte at address 32h, which is used to keep track of centuries in date calculations.
2023-09-05, Four design dimensions of automotive lighting

LED lights have been widely used in a variety of lighting environments, and with the upgrading of technology, light efficiency is also gradually improving, showing more and more advantages in practical applications. Nevertheless, in the endless pursuit of efficiency, efficiency is still one of the key design considerations because of the large amount of use and long time of automotive lighting. Efficiency is critical in electronic systems where space is limited, and in these designs the LED driver is installed very close to the LED assembly in the headlight, taillight, or side turn indicator.
2023-04-20, High precision current detection amplifier can realize current detection and current equalization

Current sharing between DC/DC converter modules enables multiple modules to be connected in parallel. In recent years, the strict tolerance of the design of separate current detection circuit makes the design of separate current detection circuit a difficult challenge. A low-cost, space-saving, high-precision current detection and sharing solution using the MAX4372 is described below.
2023-04-14, Advanced 16-bit 500Msps digital to Analog Converter (DAC)

The MAX5888 is an advanced 16-bit 500Msps digital-to-analog converter (DAC) designed to meet the demanding performance requirements for signal synthesis applications in wireless base stations and other communications applications. The converter is available in a 68-lead QFN package with exposed blades (EP) for extended industrial temperature ranges (-40°C to +85°C).
2023-04-13, High precision cell fuel meter

The DS2756 High precision battery fuel meter is a data acquisition and information storage device designed for cost-sensitive and space-limited 1-cell lithium-ion/polymer battery pack applications. Each device has a unique factory-programmed 64-bit network address, allowing the host system to be individually addressed and supporting multi-battery operation.
2023-04-10, Programmable 8-bit silicon delay line

The DS1020 programmable 8-bit silicon delay line consists of an 8-bit user programmable CMOS silicon integrated circuit. The delay value, programmed using a 3-wire serial port or an 8-bit parallel port, can vary in 256 equal steps. All models have an inherent (step size zero) delay of 10ns. It offers a standard 16-pin automatic insert DIP and a space-saving surface mount 16-pin SOIC.
2023-04-10, Programmable current limited 5V USB charging pump

The MAX5008 charge pump regulator produces 5V outputs up to 125mA with input voltage ranges from 2.95V to 5.5V. The device includes resistance programmable overcurrent limits. The MAX5008 comes in a space-saving 10-pin µMAX package and is only 1.1mm tall.
2023-04-07, Low cost, multi - output power LCD monitor/TV

The MAX8728 generates all the power rails for the thin film transistor (TFT) liquid crystal display (LCD) panel in the TV and monitor. It includes step-down and step-up regulators, positive and negative charge pumps, and dual mode, logic-controlled high-voltage switch control blocks. Small size (5mm x 5mm), low size (0.8mm), 32-pin TQFN package, operating temperature range from -40°C to +85°C.
2023-04-01, Programmable resolution 1-wire digital thermometer

The DS18B20 digital thermometer provides 9 - to 12-digit Celsius temperature measurement and features a non-volatile alarm function with user programmable up and down trigger points. The DS18B20 communicates over a 1-wire bus, which by definition requires only one data line (and ground) to communicate with the central microprocessor.
2023-03-24, High efficiency, high voltage, synchronous step-down DC-DC converter

The MAX17501 High efficiency, high voltage, synchronous step-down DC-DC converter integrates mosfet to operate in the input voltage range of 4.5V to 60V. The compact TDFN package is used. Simulation models are available, and the device provides a fixed 3.3V, 5V or adjustable output voltage (0.9V to 92%VIN) while providing up to 500mA of current. The output voltage is accurate to ±1.7% at -40°C to +125°C.
2023-03-23, Dual phase, fast pwm controller for AMD Mobile Turion 64 CPU core power

The MAX8760 is a dual-phase fast pwm step-down controller for 6-bit VID AMD Mobile Turion64 CPU core power supply. Biphasic operation reduces input ripple current requirements and output voltage ripple while alleviating component selection and layout difficulties. The fast pwm control solution provides an instantaneous response for fast load current steps and also includes active voltage positioning with adjustable gain and bias, reducing power consumption and the requirement for large output capacitance
2023-03-21, Low cost 2-wire battery monitor with ratio A/D input

The DS2746 provides system-side battery capacity monitoring in cost-sensitive applications. Voltage, bidirectional current, and accumulated current measurement data is provided to the host processor over a 2-wire interface. Offset bias and offset blanking features greatly enhance the accuracy of the coulomb counter.
2023-03-20, 1.5A Dual input USB/AC Adapter charger and smart Power selector

The MAX8677C is an integrated 1-cell Li+ charger and Smart Power Selector with dual (DC and USB) power inputs. It can operate with either separate inputs for USB and AC adapter power, or from a single input that accepts both. All power switches for charging and switching the load between battery and external power are included on-chip. No external MOSFETs are required.
2023-03-15, Digital video parallel to serial converter

The MAX9247 digital video parallel-serial converter serializes the 27 bit parallel data into serial data stream, encodes and multiplexes the 18 bit video data and 9 bit control data to the serial interface, reducing the serial data rate. The device is available in a 48-pin LQFP package with a specified temperature range of -40°C to +85°C or -40°C to +105°C.
2023-03-08, Maxim Integrated introduces the dual channel buffer

The MAX4951BE dual-channel buffer is ideal for re-driving serial ATA (SATA) I, SATA II, and SATA III signals, and has high electrostatic discharge (ESD) Q8kV Mannequin (HBM) protection. The MAX4951BE is powered by a single +3.3V(typical) power supply and can flow through traces in a small, 4mm x 4mm TQFN package for easy layout. The operating temperature range of the equipment is 0NC to +70NC.
2023-03-01, Quad Voltage Monitor in µMAX Package

The MAX6338 quad voltage monitor is capable of monitoring up to four power supplies without any external components. Internal bandgap reference ensures accurate trip thresholds over the extended operating temperature range (-40°C to +85°C). The MAX6338 consumes 25µA(typical) supply current and operates at +2.5V to +5.5V. The MAX6338 comes in a 10-pin µMAX package.
2023-02-25, A single volatile digital potentiometer

The DS1866 Log Trimmer Potentiometer is a single volatile digital potentiometer having eight positions with a 5-dB resolution per step. The device provides an ideal method for low-cost trimming or volume control using a CPU or manual control input. The device's wiper position is set to one of eight positions by a 3-terminal parallel port. The value of the device the wiper position is determined by the P0, P1, and P2 port pins.

Latest Technologies of Maxim Integrated

2024-07-15, DS1302 Pinout, Block Diagram and Applications[FAQs]

2024-06-25, DS12C887 Principle, Specifications and Operating Circuit

2023-09-05, Four design dimensions of automotive lighting

2023-04-20, High precision current detection amplifier can realize current detection and current equalization

2023-04-14, Advanced 16-bit 500Msps digital to Analog Converter (DAC)

2023-04-13, High precision cell fuel meter

2023-04-10, Programmable 8-bit silicon delay line

2023-04-10, Programmable current limited 5V USB charging pump

2023-04-07, Low cost, multi - output power LCD monitor/TV

2023-04-01, Programmable resolution 1-wire digital thermometer

2023-03-24, High efficiency, high voltage, synchronous step-down DC-DC converter

2023-03-23, Dual phase, fast pwm controller for AMD Mobile Turion 64 CPU core power

2023-03-21, Low cost 2-wire battery monitor with ratio A/D input

2023-03-20, 1.5A Dual input USB/AC Adapter charger and smart Power selector

2023-03-15, Digital video parallel to serial converter

2023-03-08, Maxim Integrated introduces the dual channel buffer

2023-03-01, Quad Voltage Monitor in µMAX Package

2023-02-25, A single volatile digital potentiometer